Mobius 5i / S200

The Mobius5i/S200 is a slimline alternative to the Mobius5i, measuring 200mm wide. The Mobius5i/S200 incorporates OptiDamping, OptiDrive and Reduced-Resonance Exciter technology to give smooth high frequency extension and low frequency performance with medium power-handling capabilities.

Product Description

The Mobius5i/S200 provides a slimline alternative to the Mobius5i invisible loudspeaker, for use when there is limited stud/joist spacing or for use in curved walls/ceilings with a radius greater than 5m. Using the same OptiDrive and OptiDamping technology as the full-size Mobius5i and benefitting from the ‘i’ upgrade, the Mobius5i/S200 is easy to install and is rendered invisible behind a 2mm plaster skim or other material such as solid wood, veneers, leather or stone veneers such as slate. The Mobius5i/S200 is the perfect solution for aesthetically sensitive applications where space is limited.

Example Applications

Invisible audio installations with space limitations or when installing into a curved wall or ceiling. Can be supplied with high-impedance 100/70V transformer.

Frequency Response

Backboxes

The Backbox CV200 creates an acoustically tuned and consistent cavity behind the speaker, helping to ensure both consistent audio quality as well as minimising rearward airborne sound transmission where Mobius loudspeakers are installed into stud walls/ceiling.

The BackboxSW200 provides a strong mechanical fixing method for solid blockwork and concrete walls/ceilings.

Single-Channel Protection

All new slim-line design, giving reliable speaker protection for life-time worry free performance, in a unit that can be conveniently dressed back with any cable management system or sit neatly behind the rack.

Multi-Channel Protection

Both 8-channel and 16-channel passive rack-mounted protection units are available for Mobius Series Loudspeakers. For use in installations with higher numbers of low-impedance speakers with a centralised AV rack. Direct-to-PCB screw terminal-blocks allow for fast and easy permanent installation.

Specifications

Nominal Impedance
4 Ohms
Power Handling
50W/100W
84dB 1m/2.83Vrms
84dB 1m/2.83Vrms
Frequency Response
90Hz - 32kHz (-6db) mounted in Backbox CV200
Useable Frequency Range
65Hz - 32kHz (+/-10dB)
Electrical Connection
Blue butt-splice crimp terminals (14-16AWG)
Product Weight
1.1kg (2lb 7oz)
Fixing Requirements
Backbox CV200 / SW200 or Mounting blocks
In-line Protection unit
APUi50C_2
Dimensions
450mm x 200mm x 32mm (173/4” x 77/8” x 11/4”)
Rack-Mount Protection Unit
APU-RS8iC or APU-RS16iC
Warranty
10 Years

TV Mounting Solutions


Automation Solutions


Radios

Tablet/Phone Mounting Solutions


Speakers


Media Hubs

Speaker Mounting Solutions


Homewares


Ergonomic Furniture


Interactive Flat Panels

Cables


Television